Similar Posts
Payload
A few weeks ago the parachute system underwent it’s first flight test. It’s flawless performance during this test marked the end of the development of the Project Redirect parachute system. We have now begun development of the guidance system. While there are many components that will make up the guidance system, the first step is…
Status update
We returned to working on Project Redirect two weeks ago. Unfortunately, the test payload receiver had to be replaced (more about this here.) At this time, we are still waiting to receive the replacement. Once it arrives, we will be able to continue preparing for our next flight. More updates will follow…
The Cameras of Project Redirect
When we flew the FTS (Flight Test System) for the first time, we recorded the flight from the ground. While this was sufficient for recording that flight, we need more cameras to record footage from different view points during the next test. This footage is necessary to gauge the performance of the system that is being…
Parachutes (Part 2)
Part 1 here. Last week we continued work on the parachute system. This is one of the more important systems of the test payload and when completed will bring us much closer to our flight. Our plan was to upgrade the springs and perform more tests in an attempt to increase the power. However, after…
Phase 1; an Overview
Project Redirect is a large project that consists of many milestones that must be completed for a successful high altitude balloon flight. The milestones that need to be completed can be separated into two phases. Phase 1 is currently active. The goals of phase 1 are as follows: Setup and test the FTS (Flight Test…
Enclosure
With the goal of eliminating the faults that caused the failure during the Parachute System Control Computers (PSCC) last drop test, we kept two objectives in mind as we developed the second generation PSCC. The first of these goals was to improve the electronics and code of the PSCC-2, enhancing it’s reliability and accuracy. This…
what a cool video
Thanks