When we flew the FTS (Flight Test System) for the first time, we recorded the flight from the ground. While this was sufficient for recording that flight, we need more cameras to record footage from different view points during the next test. This footage is necessary to gauge the performance of the system that is being…
Part one here. High Altitude Balloons (HABs) are a unique system that are capable of carrying payloads to near space at a low cost. HABs are made up of many different components, the most significant of these are the balloon, parachute and payload. Balloon Their are two types of balloons. The most common is a…
High Altitude Balloons (HABs) are manned or unmanned balloons that are used to carry payloads into the stratosphere. HABs are capable of reaching altitudes of 18-53 km (11-32 mi) above sea level. HABs are filled with lighter than air gas. It is this gas, that gives them their lift. Once filled, the HAB is released,…
Project Redirect is a large project that consists of many milestones that must be completed for a successful high altitude balloon flight. The milestones that need to be completed can be separated into two phases. Phase 1 is currently active. The goals of phase 1 are as follows: Setup and test the FTS (Flight Test…
Click here for part 1 The second subsystem of the FTS (Flight Test System) is the test payload. It will be dropped by the S1000+ from 106.7 m (350 ft). Above is a 3D model of the guidance system test payload. The test payload will differ in design depending on which system will be tested. …
The Flight Test System (FTS), is one of many systems that make up Project Redirect. The FTS is designed to test various components of Project Redirect in a real world environment.
