Test 11
On the 15th of June, we flight tested the parachute system that we have been developing for Project Redirect. We have finished editing the footage from this test which can be viewed below.
On the 15th of June, we flight tested the parachute system that we have been developing for Project Redirect. We have finished editing the footage from this test which can be viewed below.
The original design of the parachute system used ballistic deployment. This meant the system would use springs, CO2, or pyrotechnics to force the chute from the tube it was stored in. The main advantage of a ballistic parachute system is that the significant speed of the parachute after launch, decreases deployment time of the parachute….
In the past few weeks we have made significant progress with both the GTP (Guidance Test Payload) and PSCC (Parachute System Control Computer). This continues to bring us closer to the first test flight of the GTP. With the arrival of new 3D printing material (filament) we were able to print the rest of the…
We have been continuing our preparations for the first test flight of the GTP (Guidance Test Payload) that will signal the start of the development of the guidance system. Our efforts in the past weeks have been focused in three different areas. First, with the completion of the internal parachute module and the painting of…
A little over a week later we returned to the test site, once again ready to test the PSCC. This time we were better prepared, bringing with us a wider selection of tools and an upgraded battery charger that could charge the FTS’s (Flight Test System) battery much faster. While originally we planned to fly…
With the goal of eliminating the faults that caused the failure during the Parachute System Control Computers (PSCC) last drop test, we kept two objectives in mind as we developed the second generation PSCC. The first of these goals was to improve the electronics and code of the PSCC-2, enhancing it’s reliability and accuracy. This…
Originally the plan was to fly the FTS (Flight Test System) for the first time on Saturday the 25th. To achieve this goal, we first had to complete a few parts of the FTS. We began by finishing the S1000+; starting with wiring and securing the various components of the flight controller. We also needed…
Great job! How did it feel to have a successful flight? The horses at the end cracked me up!
It was awesome to have a success.
Awesome!! Seeing the parachute deploy was so cool.
Great footage. Love the music. Nice touch leaving the horses in! Well done!
Wowza! That was so exciting! Good work!
Good work that you’re doing here. The parachute looks to work flawlessly. It’s cool how the music lines up perfectly with the footage. Keep it up!